Custom Electrical Characteristics

1. Material and Construction:

   Base Material: FR-4, chosen for its excellent balance between performance, durability, and cost-effectiveness.

   Copper Thickness: Customizable from 1 oz/ft² (35 µm) to 2 oz/ft² (70 µm) depending on the current requirements of your application.

2. Board Dimensions:

   Diameter: Fully customizable, typically ranging from 1 inch to 12 inches, catering to specific project needs and space constraints.

   Thickness: Standard thickness of 1.6 mm, with options to customize between 0.8 mm and 3.2 mm based on mechanical and thermal requirements.

3. Trace Specifications:

   Minimum Trace Width: Customizable from 4 mils (0.1 mm) to accommodate different current loads and ensure reliable signal transmission.

   Minimum Trace Spacing: Customizable from 4 mils (0.1 mm) to provide adequate isolation between conductive paths, minimizing the risk of short circuits and signal interference.

4. Drilling Specifications:

   Hole Sizes: Customizable, with standard sizes ranging from 0.2 mm to 0.8 mm, suitable for various through-hole components and ensuring robust mechanical and electrical connections.

   Plating: Customizable plated through holes (PTH) for reliable inter-layer connectivity.

5. Electrical Properties:

   Dielectric Constant (Dk): Approximately 4.5 at 1 MHz, with options to customize for high-frequency applications, ensuring signal integrity and performance.

   Insulation Resistance: Greater than 10⁸ ohms, customizable to meet specific isolation requirements for sensitive circuits.

   Operating Temperature Range: -40°C to 85°C, with options to extend based on specific application needs, ensuring reliable operation in various environments.

6. Surface Finish:

   HASL (Hot Air Solder Leveling): Standard finish providing good solderability, with customizable options such as ENIG (Electroless Nickel/Immersion Gold) for enhanced durability, corrosion resistance, and planarity.

   Other Finishes Available: Options like OSP (Organic Solderability Preservatives), Immersion Silver, and Immersion Tin for specific application requirements.

7. Solder Mask:

   Color: Standard blue for a distinctive appearance, with options to customize the color for specific visual or functional needs.

   Type: High-quality solder mask ensuring excellent coverage and protection against environmental factors, customizable for specific chemical or thermal resistance requirements.

8. Testing and Quality Assurance:

   Electrical Testing: 100% electrical testing to ensure circuit integrity, with customizable testing protocols based on application-specific reliability standards.

   Automated Optical Inspection (AOI): Ensures defect-free production and adherence to design specifications, with options for additional inspection methods like X-ray for multilayer boards.

Our Printed Circuit Board is customizable to meet your specific electrical characteristics, ensuring that your project requirements are met with precision and reliability. Contact us today to discuss your unique needs and discover how our customized PCBs can elevate your project.