According to the actual experience of the use of ink by most manufacturers, the use of ink must be carried out in accordance with the following provisions:

　　1, in any case, the temperature of the ink must be kept below 20-25 ° C, the temperature change can not be too large, otherwise it will affect the viscosity of the ink and screen printing quality and effect.

　　Especially when the ink is stored outdoors or at different temperatures, it must be placed at the ambient temperature for a few days or the appropriate operating temperature must be reached in the ink bucket before use. This is because the use of cold ink will cause screen printing failure, causing unnecessary trouble. Therefore, to maintain the quality of the ink, it is best to store or store under normal temperature process conditions.

　　2, before use, the ink must be fully and carefully manually or mechanically stirred evenly. If the ink enters the air, use it to stand for a period of time. If dilution is required, it is first thoroughly mixed and then its viscosity is tested. The ink drum must be sealed immediately after use. At the same time, never put the screen ink back into the ink bucket and mix with unused ink.

　　3, it is best to use mutually adapted cleaning agents to clean the net, and to be very thorough and clean. When cleaning again, it is best to use clean solvents.

　　4. When the ink is dried, it must be carried out in a device with a good exhaust system.

　　5, to maintain the working conditions should meet the technical requirements of the work field for screen printing operations.