1、 Purpose:

　　Cut large pieces of sheet metal into small pieces of various required specifications.

　　2、 Process flow:

　　3、 Equipment and function:

　　1. Automatic cutting machine: Cut large materials into various fine materials.

　　2. Rounding machine: Grind the dust ends of the plate corners to a round shape.

　　3. Washing machine: Clean and air dry the dust and impurities on the board machine.

　　4. Oven: Furnace board to improve the stability of the board material.

　　5. Word marking machine; Type a label on the edge of the board for marking.

　　4、 Operating specifications:

　　1. Before starting the automatic feeding machine, check the set size to prevent incorrect feeding.

　　2. After cutting the inner layer board, attention should be paid to adding marks to separate the materials horizontally and vertically, and avoid confusion.

　　3. When handling the board, gloves should be worn and handled with care to prevent scratching the board surface.

　　4. After washing the board, it is necessary to pay attention to water stains on the board surface. It is prohibited to bake the board with water stains to prevent oxidation.

　　5. Check the temperature setting value before starting the oven.